Bgp Med Configuration - Acer AB460 F1 User Manual

431
Parameter
Hold Time
(Seconds)
Remote AS
Advertisement
Interval (seconds)
Status

BGP MED Configuration

Clicking the M
ULTI
page, which allows you to configure the MED value for routes learnt
from BGP peers. The parameters for this page are shown in the
following table.
Parameter
MED ID
Description
This parameter specifies the Hold time. This is the timer
interval that a BGP will wait, before it decides that a
connection to the peer is torn down.
This parameter represents the remote autonomous
system number.
This parameter specifies the interval in seconds for the
Minimum Route advertisement interval timer.
This parameter specifies the status of the entry.
-E D tab brings up the BGP MED C
XIT ISC
Description
This parameter specifies the index for this table.
ONFIGURATION