Syslog Configuration - Acer AB460 F1 User Manual

297

Syslog Configuration

Clicking the L
OGGING
which allows you to configure logging parameters. The parameters for
this page are shown in the following table.
Parameter
Syslog
Server IP Address
Buffer Size
Timestamp
Console Log
Figure 4-185. Syslog Configuration
tab brings up the S
Description
This parameter enables or disables the Syslog feature.
This parameter specifies the Syslog server IP address.
Make sure the Server IP is reachable.
The buffer size is specfied in log entries. Max entries
200
buffered is .
This parameter allows you to enable or disable the
adding of a timestamp to the log messages.
This parameter allows you to enable or disable logging
to the console.
C
YSLOG ONFIGURATION
page,