335
Parameter
Stacking
Stack Details
Clicking the S
TACK
displays stacking details. The parameters for this page are shown in the
following table.
Parameter
Self Status
Stack Ports
Switch ID
Stack IP
Description
This parameter enables or disables stacking.
NOTE:
Any change in stacking status requires a reboot of the
switch.
Figure 4-214. Stack Details
D
tab brings up the S
ETAILS
Description
This is the number of stacking ports configured in this
switch.
This parameter is used to specify the switch identifier
of this switch.
This parameter is used to specify the IP address of this
switch. This IP address is used to communicate between
stack member switches.
D
page, which
TACK
ETAILS