Acer AB460 F1 User Manual page 400

380
Parameter
Port Control
Port Authorization
Status
Authentication
Mode
Admin Control
Direction
Operational
Control Direction
Port Initialize
Maximum
Authentication
Request
Reauthentication
Description
This parameter specifies the control values of the
Authenticator Port. The control values can be:
Force Authorize
•
be allowed always.
Force Unauthorize
•
will be blocked always.
Auto
• - The 802.1x authentication process will be imposed
over this port.
This parameter specifies current status of the port
Authorized
either as
This parameter specifies the configuration for selecting
the A
UTHENTICATION
This parameter specifies whether security is to be
imposed for
In
• - the incoming traffic
Both
• - both incoming and outgoing traffic
This parameter specifies the current security status.
This parameter specifies the initialization control for
the port. Setting this value to
be initialized. The value reverts to
initialization is complete.
This parameter specifies the maximum number of
authentication requests that can be sent from the
authenticator before getting a response from the
supplicant.
This parameter provides configuration to enable or
disable the reauthentication mechanism on the port.
4 Networking Switch Modules
- All the traffic through this port will
- All the traffic through this port
Un-Authorized
or
Port Based
M to be
ODE
True
causes the port to
False
.
.
once