Event Configuration - Acer AB460 F1 User Manual

318
Clicking the B
ASIC
which enables/disables the RMON feature using the RMON Status
parameter.

Event Configuration

Clicking the E
VENTS
configures RMON events. The parameters for this page are shown in
the following table.
Parameter
Index
Description
Type
S tab brings up the RMON B
ETTINGS
Figure 4-202. Event Configurations
tab brings up the E
Description
This parameter specifies the index to the Events table.
This parameter specifies a brief description of the
event.
This parameter specifies the event configured. This can
Log SNMP Trap
be a , an
type to display,
must be configured.
4 Networking Switch Modules
C
VENT ONFIGURATIONS
Both None
, , or
TRAP and Log
and
S page,
ASIC ETTINGS
page, which
. For the event
TRAP Community