Acer AB460 F1 User Manual page 82

62
Item Name
1 Force
HTTPS for
Web
Access
2 KVM
Encryption
3 Enable P
Access
Control
Figure 2-33. Security Screen
1
2
3
4
6
5
9
8
12
13
Description
Check this box to enable Force HTTPS for Web Access. If
enabled, you will need to use an HTTPS connection to
access the web.
This option allows you to configure the encryption of
the RFB protocol. RFB is used by the remote host to
transmit video data displayed in the host monitor to
the local administrator machine and to transmit
keyboard and mouse data from the local administrator
machine back to the remote host.
If set to O , no encryption will be used. If set to T
FF
the applet (JVM of the remote host) will attempt to
make an encrypted connection. In this case, when a
connection cannot be established, an unencrypted
connection will be used. If set to F
make an encrypted connection. In this case, an error
will be reported if no connection is made.
Check this box to enable IP Access Control. This I
function is used to limit user access to the network by
identifying them by their IP address (available to the
LAN interface only.)
2 Chassis Enclosure
7
10
11
, the applet will
ORCE
,
RY