Interfaces - Acer AB460 F1 User Manual

404
Parameter
Output-delay
Neighbor Filter
Auto-summary
status

Interfaces

Clicking the I
NTERFACE
parameters for this page are shown in the following table.
Parameter
Interface
Description
This parameter specifies the delay that needs to be
enabled for RIP to split the periodic update packets
before they are sent out.
This parameter enables or disables neighbor filtering.
Neighbor filtering helps you to filter routes from
specific neighbors.
This parameter enables or disables the Auto-summary
feature.
tab brings up the RIP I
Description
This parameter specifies the Interface ID for which RIP
needs to be configured.
4 Networking Switch Modules
page. The
NTERFACE