401
Parameter
Lease Time
Utilization
Threshold
Status
DHCP Relay
The DHCP Relay link helps you to manage the DHCP relay in the switch
through the following two pages:
•
"DHCP Relay Basic Settings" on page 401
•
"Interface Settings" on page 402
DHCP Relay Basic Settings
Clicking the B
ASIC
page, which displays the various parameters for configuring the DHCP
relay. The parameters for this page are shown in the following table.
Description
This parameter specifies the time interval for which the
IP address is valid.
This parameter specifies the DHCP Pool Utilization
Threshold value.
This parameter specifies the status of the entry.
S
tab brings up the DHCP R
ETTINGS
C
ELAY
ONFIGURATION