385
Parameter
Allowed Ports
Status
Multicast Filters
Clicking the M
ULTICAST
C
page, which allows you to set the filter configuration to
ONFIGURATION
control the multicast packets that the switch needs to process. The
parameters for this page are shown in the following table.
Description
This parameter specifies the list of ports on which the
received packet, with the above set MAC address (if
received from the configured port) can be forwarded.
You can choose to set this configuration to any one of
the following types:
Other
•
– For entries currently in use, but whose
conditions remain different from the following values.
Permanent
•
– Entries that reside even after the restart
of the switch.
DeleteOnReset
•
DeleteOnTimeout
•
expiration of the ageing timer.
F
tab brings up the L2 M
ILTERS
– This deletes the entry on restart.
– This deletes the entry on
ULTICAST
F
ILTER