426
Parameter
NSSA Stability
Interval
Stub Metric Type
OSPF V3 External Aggregation
Clicking the E
A
XT
A
C
GGREGATION
ONFIGURATION
external aggregation parameters. The parameters for this page are
shown in the following table.
Parameter
Network
Mask
Description
This parameter specifies the number of seconds after
an elected translator determines its services are no
longer required, in which it must continue to perform
its translation duties.
This parameter specifies the type of metric (
Metric, External Type 1, External Type 2
default route.
tab brings up the OSPF AS E
GGREGATION
page, which allows you to configure OSPF
Description
This parameter specifies the external network address.
This parameter specifies the network mask.
4 Networking Switch Modules
OSPFv3
) advertised as a
XTERNAL