Port Monitoring - Acer AB460 F1 User Manual

342
Parameter
MTU
Link Up/Down Trap

Port Monitoring

Clicking the P
ORT
which allows you to enable or disbale monitoring on port interface.
The parameters for this page are shown in the following table.
Parameter
Status
Port
Description
This sets the MTU value. The Minimum is
16338
Maximum is
down in order to change the MTU.
This parameter enables or disables SNMP trap
generation for port up and down events.
Figure 4-219. Port Monitoring
M tab brings up the P
ONITORING
Description
This parameter enables or disables the port
monitoring.
This displays the port number.
4 Networking Switch Modules
. A port must be administrativly
M
ORT
90
and
page,
ONITORING