Acer AB460 F1 User Manual page 332

312
Clicking the T
ARGET
S page, which configures SNMP target address parameters. The
ETTINGS
parameters for this page are shown in the following table.
Parameter
Target Name
Target IP Address
Target Timeout
Target Retries
Transport Tag
Param
Storage Type
A tab brings up the SNMP T
DDRESS
Description
This parameter specifies a T
identifier.
The T IP A
ARGET DDRESS
used in the generation of SNMP operations.
T T specifies the maximum round trip for
ARGET IMEOUT
communicating with the T
T R specifies the number of attempts to be
ARGET ETRIES
made when no response is received
The T T
RANSPORT AG
address for a particular operation.
P contains SNMP parameters to be used when
ARAM
generating messages to be sent to a transport address.
Use this parameter to specify whether the S
volatile non-volatile
is or
4 Networking Switch Modules
ARGET
N
ARGET AME
specifies a target address to be
IP A
ARGET DDRESS
value is used to select a target
.
A
DDRESS
as a unique
.
T
TORAGE YPE