Port Settings - Acer AB460 F1 User Manual

350
4 Networking Switch Modules

Port Settings

Clicking the P S tab brings up the VLAN P S page,
ORT ETTINGS ORT ETTINGS
which is used to associate the VLAN ID to the port for Port based VLAN
classification.
While associating different ports to VLANs, you can also configure
I F (at the port level) and A F T (accept
NGRESS ILTERING CCEPTABLE RAME YPES
Tagged Frame Alone All
or frames).
The other configurations provided in this page are, enabling/disabling
per Port MAC based classification and Port Protocol based
classification, enabling/disabling of tunneling and enabling/disabling
of STP BPDU Tunneling. To enable STP BPDU Tunneling on an
interface, you must first enable tunneling on that interface.