Acer AB460 F1 User Manual page 381

361
RSTP Basic Settings
Clicking the B
ASIC
which displays the various parameters for RSTP configuration. The
parameters for this page are shown in the following table.
Parameter
System Control
RSTP Status
Compatibility
Bridge Priority
Transmit Hold
Count
S tab brings up the RSTP C
ETTINGS
Description
This parameter allows you to start or shutsdown RSTP
in the switch.
This parameter allows you to enable/disable the
protocol at a global level on the switch.
This parameter allows you to choose to run the
protocol as an RSTP or STP compatible version.
This parameter specifies the B
be used to select the root bridge.
This parameter specifies the maximum number of
packets that can be sent in a given interval. This is
configured to avoid flooding.
page,
ONFIGURATION
P , which can
RIDGE RIORITY