33
Item
Name
1
Power On
2
Power Off
3
Reset
4
UID On
5
UID Off
6
KVM
7
Graceful
Shutdown
8
Refresh
Blade
Status
Figure 2-15. Blade Status Screen
1
4
7
Description
Click to apply power to (power up) a selected blade
module.
Click to remove power from a selected blade module.
Click this icon to reset a selected blade module.
Click this icon to turn on the UID LED of a selected
blade module.
Click this icon to turn off the UID LED of a selected
blade module.
Click on this icon to initiate Remote KVM over IP and
remotely operate a selected blade module.
Click to send a selected blade module into an S5 sleep
state.
Click to refresh the screen and update the status of the
blade modules shown.
2
3
5
6
8