Acer AB460 F1 User Manual page 164

144
Enter Update Mode: Click on this item to enter the update mode.
Warning! Once you've entered the firmware update
mode, the device will be reset even if you cancel the
process of firmware updating.
Notes:
1. When updating firmware, you are given the option to
"Preserve Configuration." Uncheck this option to load the
factory default settings, and all the configuration settings
will be lost.
2. If you are using the Static IP mode, it is not
recommended to uncheck the option-"Preserve
Configuration," since it will reset the network settings to
the DHCP (Dynamic Host Configuration Protocol) mode.
3 Server Blades: Setup and Installation
Figure 3-100. Firmware