Reset Button - Acer AB460 F1 User Manual

19
Item# Description
6 USB orts
7

Reset Button

8 Module Release Handle
9 USB 2.0/1.1 Switch (accessed at back of module, see Figure 2-9)
Feature
Management
Capabilities
Ports
Basic Functions
Supported
System Management
Power Consumption
Operating System
Reset Button
The Reset button located on the front of the CMM module is used to
reset the following software settings to their defaults:
Software Setting
User Name and
Password
IP Address
Acer Address
P
Description
Can manage 10 blade units with up to 20
computing nodes, network modules and 4 power
supplies
One Ethernet port, one VGA port and two USB
ports
Local KVM, remote KVM, remote storage, Serial-
over-LAN (SOL), blade monitoring and control
System management interface provided via
dedicated LAN
Approximately 20W
Firmware (upgradable)
Default
Reset to root and superuser (case
sensitive)
Reset to 192.168.100.100
Reset to 0.0.0.0