Acer AB460 F1 User Manual page 411

391
LoopBack Basic Settings
Clicking the L
OOP
S page, which allows you to configure loopback IP interfaces.
ETTINGS
The parameters for this page are shown in the following table.
Parameter
LoopBack Interface
Interface Type
Interface Status
IP Address
Subnet Mask
B S tab brings up the L
ACK ETTINGS
Description
This parameter is the name of the loopback interface
getting created.
This parameter is always the loopback for this
configuration.
This parameter for the I
Up Down
or .
This parameter specifies the IP address for this
loopback interface.
This parameter specifies the subnet mask for this
loopback interface.
B B
OOP ACK
S can be set to
NTERFACE TATUS
ASIC