400
Pool Settings
Clicking the P
OOL
which allows you to configure the IP address pool that can be used by
the DHCP server to allocate IP addresses. The parameters for this page
are shown in the following table.
Parameter
Pool ID
Network
Subnet Mask
Start IP
End IP
S
link brings up the DHCP P
ETTINS
Description
This parameter specifies the pool ID to index among
the different subnet pools configured.
This parameter specifies the subnet of the IP address in
the pool.
This parameter specifies the subnet mask of the IP
address in the pool.
This parameter specifies the first IP address in the
address pool that is used for dynamic allocation by the
DHCP server.
This parameter specifies the last IP address in the
address pool that is used for dynamic allocation by the
DHCP server.
4 Networking Switch Modules
S
OOL
ETTINGS
page,