324
Parameter
System Control
Status
QoS Classmap Settings
Clicking the C
LASSMAP
which is used to classify the stream of traffic. The parameters for this
page are shown in the following table.
Parameter
Classmap ID
Filter ID
Description
With this parameter S
Shutdown
QoS.
This parameter allows enabling/disabling of the QoS
status.
Figure 4-207. QoS Classmap Settings
tab brings up the Q
Description
This parameter specifies a unique ID for the Classmap.
It must be in the range from
This parameter specifies the unique filter ID associated
with this Classmap.
4 Networking Switch Modules
C
can
YSTEM
ONTROL
S C
S
O
LASSMAP
ETTINGS
1
65535
to
.
Start
or
page,