Management Security Basic Settings - Acer AB460 F1 User Manual

287

Management Security Basic Settings

Figure 4-177. Management Security Basic Settings
Clicking the M
ANAGEMENT
S B S
ECURITY ASIC ETTINGS
listed basic security parameters see the following table.
Parameter
Authentication
mode
Authentication
traps
Administrative users can also create
privilege users can use these Enable Passwords in the W
to enable access to privilege configurations.
Administrative users can set an
By default, the Enable Password is set only for the highest level
(Level_15). This default password is the same as the default password
set for the root user login.
S tab brings up the M
ECURITY
page. This page allows you to setup the below
Description
Use this parameter to choose the mode of
authentication for management access. By default the
management access is authenticated with L
accounts information. However you can choose to
authenticate using
You can enable SNMP Traps for SNMP access
authentication events using this parameter..
Enable Passwords
Enable Password
ANAGEMENT
Radius TACACS
or instead.
in this page. Low
EB
for all privilege levels.
user
OCAL
S page
ETTINGS