Qos Policymap Settings - Acer AB460 F1 User Manual

325
Parameter
Filter Type

QoS Policymap Settings

Clicking the P
OLICYMAP
which is used to specify action for a specified classmap. The parameters
for this page are shown in the following table.
Parameter
Policy Map ID
Class Map ID
Traffic Rate
Description
This parameter specifies the filter type associated with
the Classmap. It can be set as either
filter (2)
.
Figure 4-208. QoS Policymap Settings
tab brings up the Q
Description
This parameter specifies the unique ID for Policymap.
The value ranges between
This parameter specifies the C
with Policymap.
This parameter specifies the T
has to be applied.
MAC filter (1)
S P S
O OLICYMAP ETTINGS
1 65535.
and
M ID to associate
LASS AP
R of data that
RAFFIC ATE
IP
or
page,