Acer AB460 F1 User Manual page 383

363
Parameter
Protocol Migration
PortFast
Point-to-Point
Auto Edge Status
Restricted Role
Restricted TCN
Description
This parameter controls the migration from RSTP to
STP, if the other side of the switch runs STP. The
migration takes place only if this is
This parameter must be configured, if the
corresponding port is an edge port.
This parameter allows you to configure ports explicitly
Point-to-point
as (Force true),
leave the decision to be made
AL or MAC layer).
If this parameter is set to
dynamically calculated.
This parameter specifies the R
the port.
This parameter indicates the R
the port.
Enabled
.
Non-point-to-point
Dynamically
(from the
true
, the edge port status is
R status of
ESTRICTED OLE
TCN status of
ESTRICTED
or