Appendix J
When using LUN Manager on a Fabric Switch connection:
When connecting to the servers (HBA) or exchanging the HBA, connect to the servers
(HBA) that access the Disk Array after the LUN Security or LUN Management settings,
including WWN registration, are completed.
Zoning on Fabric Switch must be set as shown below to disturb the access from HBA that
cannot be accessed from the Disk Array by LUN Manager.
J.1
When an FC Interface Board is Not Added to the Control Unit
Host-A
HBA#1
Fabric Switch
Figure J.1
Using LUN Security or LUN Management on a Fabric
Switch Connection
HBA#2
Port 0A
(Mini-HUB)
CTL 0
LU0(HBA#1,
HBA#2)
LU1(HBA#3)
Zoning on Fabric Switch (When the FC interface board is not added to the control unit)
Host-B
HBA#3
HBA#4
Port 1A
(Mini-HUB)
CTL 1
Acer | HDS WMS100™ User and Reference Guide
:
Zoning
305