Servicing Processor Modules - Oracle SPARC T8-4 Service Manual

Servicing Processor Modules

This topic describes how to service processor modules, and how to upgrade the server from a
single processor module configuration to a dual processor module configuration.
You must disconnect the power cords before servicing this component. See
Caution -
"Disconnect Power Cords" on page
Description
Replace a processor module.
Learn the process for upgrading the server from a single
processor module configuration to a two processor
module configuration.
Remove the processor module as part of another
component's service operation.
Install the processor module as part of another
component's service operation.
Related Information
"Identifying Components" on page 13
■
"Processor Module Components" on page 18
■
"Detecting and Managing Faults" on page 25
■
"Preparing for Service" on page 43
■
"Component Service Categories" on page 46
■
"Servicing DIMMs" on page 69
■
"Returning the Server to Operation" on page 191
■
53.
Links
■ "Determine Which Processor Module Is
Faulty" on page 59
■ "Preparing for Service" on page 43
■ "Remove a Processor Module or Processor Filler
Module" on page 60
■ "Install a Processor Module or Processor Filler
Module" on page 63
■ "Verify a Processor Module" on page 67
"Server Upgrade Process" on page 56
"Remove a Processor Module or Processor Filler
Module" on page 60
"Install a Processor Module or Processor Filler
Module" on page 63
Servicing Processor Modules 55