Check For Faults - Oracle SPARC T8-4 Service Manual

Related Information
"Interpreting LEDs" on page 27
■
"Check for Faults" on page 33
■

Check for Faults

The fmadm faulty command displays the list of faults detected by PSH. You can run this
command from either the host or through the Oracle ILOM fault management shell.
1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
Check for PSH-diagnosed faults.
2.
This example shows how to check for faults through the Oracle ILOM fault management shell.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp> fmadm faulty
------------------- ------------------------------------ ------------- -------
Time UUID msgid Severity
------------------- ------------------------------------ ------------- -------
2014-08-27/19:46:26 4ec16c8d-5cdb-c6ca-c949-e24d3637ef27 PCIEX-8000-8R Major
Problem Status : solved
Diag Engine : [unknown]
System
Manufacturer : Oracle Corporation
Name : SPARC T8-4
Part_Number : 12345678+11+1
Serial_Number : 1238BDC0DF
----------------------------------------
Suspect 1 of 1
Fault class : fault.io.pciex.device-interr-corr
Certainty : 100%
Affects : hc:///chassis=0/motherboard=0/cpuboard=0/chip=0/hostbridge=0/
pciexrc=0
Status : faulted but still in service
FRU
Status : faulty
Location : /SYS/PM0
32.
Detecting and Managing Faults
Check for Faults
33