Oracle SPARC T8-4 Service Manual page 153

Are you sure you want to start the faultmgmt shell (y/n)? y
faultmgmtsp>
5.
Use the fmadm faulty command to check for faults.
If faults are reported, see
■
If no faults are reported, then the fan module has been replaced successfully.
■
Related Information
"Determine Which Fan Module Is Faulty" on page 147
■
"Remove a Fan Module" on page 148
■
"Install a Fan Module" on page 151
■
"Diagnostics Process" on page
Verify a Fan Module
26.
Servicing Fan Modules 153