Oracle SPARC T8-4 Service Manual page 123

The acceptable values for uri are:
■
tftp
■
ftp
■
sftp
■
scp
■
http
■
https
■
target is the remote location where you stored the configuration information.
■
For example:
-> load -source tftp://129.99.99.99/pathname
If TPM was initialized on the replaced SPM, complete these steps:
8.
a.
Reinitialize TPM and reset the tpmadm failover command if it was previously
in use.
For information about initializing TPM using the Oracle ILOM interface to enable failover,
see Securing Systems and Attached Devices in Oracle Solaris
b. Restore the TPM data and keys that were backed up to the new SP you
install.
For information about migrating or restoring TPM data and keys, see
and Attached Devices in Oracle Solaris
9. Verify the installation of the SPM.
See "Verify the SPM" on page
10. Verify that the SPM date is correct.
-> show /SP/clock
/SP/clock
Properties:
datetime = Tue Sep 07 08:09:59 2013
timezone = GMT (GMT)
uptime = 0 days, 00:01:18
usentpserver = disabled
->
11.3.
124.
Install the SPM
11.3.
Securing Systems
Servicing the SPM 123