Oracle SPARC T8-4 Service Manual page 29

Front Panel Controls and LEDs
No. LED
1 Locator LED and
button (white)
2 System Faulit
(Service Action
Required) LED
(amber)
3 Power OK LED
(green)
Icon or Label Description
You can turn on the Locator LED to identify a particular server.
When lit, the LED displays as a fast blink. The blinking will time
out after 15 minutes. Turn on the Locator LED by pressing the
Locator button, or see "Locate the Server" on page
The fmadm faulty command provides details about any
faults that cause this indicator to light. See
Faults" on page 33.
Under some fault conditions, individual component fault LEDs
are lit in addition to the Server Service Required LED.
Indicates these conditions:
■ Off – Server is not running in its normal state. Server power
might be off. The SPM might be running.
■ Steady on – Server is powered on and is running in its normal
operating state. No service actions are required.
■ Fast blink – Server is running in standby mode and can be
quickly returned to full function.
Detecting and Managing Faults
Checking for Faults
49.
"Check for
29