Table of Contents
Advertisement
4.
Disconnect the power cords.
See
"Disconnect Power Cords" on page
5.
Label the cables connected to the ports on the rear I/O module, and then
disconnect the cables from the ports.
You will reconnect the cables to the same ports on the replacement rear I/O module.
6.
Press the green buttons on the rear I/O module ejection levers, and spread the
levers open to eject the rear I/O module.
53.
Servicing the Rear I/O Module
Remove the Rear I/O Module
177
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T8-4 and is the answer not in the manual?
Questions and answers