Oracle SPARC T8-4 Service Manual page 162

Remove a PCIe Card Carrier
If you are removing a PCIe card carrier from a powered-down server, go to
■
Take one of these actions to bring the PCIe card offline.
4.
Press the ATTN button to take the card offline. The Power OK LED should go
■
off, indicating that the card is ready to be removed. Go to
■ Use the hotplug command to bring the card offline:
a.
b.
c.
162 SPARC T8-4 Server Service Manual • January 2022
List all devices in the device tree, including PCIe cards:
# hotplug list -cv
This command lists dynamically reconfigurable hardware resources and shows
their operational status. In this case, look for the status of the PCIe card you plan to
remove. This information is listed in the State column.
For example:
# hotplug list -cv
Connection State
______________________________________________________________________________
PCIE1 EMPTY
...
PCIE7 ENABLED
Device
___________________________________________________________________________
SUNW,qlc@0
fp
disk
fp@0,0
SUNW,qlc@0,1
fp
disk
fp@0,0
PCIE13 EMPTY
PCIE15 EMPTY
Bring the PCIe card offline.
For example:
# hotplug disable PCIE7
Verify that the PCIe card status is PRESENT.
Description
PCIe-Native
PCIe-Native
Usage
-
-
-
-
-
-
-
-
PCIe-Native
PCIe-Native
Step 5.
Step 5.