Remove The Spm - Oracle SPARC T8-4 Service Manual

Remove the SPM

See "Remove the SPM" on page
Related Information
"Remove the SPM" on page 118
■
"Install the SPM" on page 121
■
"Verify the SPM" on page 124
■
Remove the SPM
The SPM is a cold-service component that can be replaced by a customer.
Caution -
discharge. This discharge can cause failure of server components.
1. Back up the SPM configuration information before removing the SPM.
At the Oracle ILOM prompt, type:
-> cd /SP/config
-> dump -destination uri target
where:
The acceptable values for uri are:
■
■
■
■
■
■
■
target is the remote location where you want to store the configuration
■
information.
For example:
-> dump -destination tftp://129.99.99.99/pathname
118 SPARC T8-4 Server Service Manual • January 2022
This procedure requires that you handle components that are sensitive to electrostatic
tftp
ftp
sftp
scp
http
https
118.