Remove A Fan Module - Oracle SPARC T8-4 Service Manual

Remove a Fan Module

Related Information
"Remove a Fan Module" on page 148
■
"Install a Fan Module" on page 151
■
"Verify a Fan Module" on page 152
■
Remove a Fan Module
The fan module is a hot-service component that can be replaced by a customer.
Caution -
discharge. This discharge can cause failure of server components.
1. Locate the faulty fan module that you want to remove from the server.
See
■
modules in the server.
See
■
fan module.
2. Determine if you can remove the fan module with the server running or not.
See "Fan Module Configuration" on page 146
with the server running or if you must shut down the server before removing a fan module.
■ If you can remove a fan module with the server running, go to
If you cannot remove a fan module with the server running, see
■
Power From the Server" on page 50
continuing.
148 SPARC T8-4 Server Service Manual • January 2022
This procedure requires that you handle components that are sensitive to electrostatic
"Rear Panel Components" on page 15
"Determine Which Fan Module Is Faulty" on page 147
for the locations of the fan
to determine if you can remove a fan module
to power down the server before
to locate a faulty
Step 3.
"Removing