Oracle SPARC T8-4 Service Manual page 83

8. Place the cover onto the processor module and slide the cover forward until the
latch clicks into place.
9. Consider your next steps.
If you are adding a second processor module to the server, return to
■
Upgrade Process" on page
If you are replacing a processor module after installing replacement DIMMs,
■
proceed to
10. Finish the installation procedure.
See:
Install the processor module.
■
See "Install a Processor Module or Processor Filler Module" on page
Return the server to operation.
■
See "Returning the Server to Operation" on page
Verify DIMM functionality.
■
See "Verify a DIMM" on page
Related Information
"Understanding DIMM Configurations" on page 69
■
56.
Step 10.
84.
63.
191.
Servicing DIMMs
Install a DIMM
"Server
83