Oracle SPARC T8-4 Service Manual page 62

Remove a Processor Module or Processor Filler Module
This action protects the levers from damage while the module is outside the server.
7. The processor module is heavy. Use two hands to completely remove the
processor module (or processor filler module) and place the module on an
antistatic mat.
Caution -
Determine your next step.
8.
If you are replacing or installing DIMMs within the processor module, see
■
"Servicing DIMMs" on page
If you are replacing a faulty processor module, populate and install the
■
replacement processor module:
62 SPARC T8-4 Server Service Manual • January 2022
Do not touch the connectors at the rear of the module.
69.