Table of Contents
Advertisement
Remove a Hard Drive
Replace c2::w5000cca00a76d1f5,0 with the drive name that applies to your situation.
Verify that the blue Ready to Remove LED on the drive is lit.
c.
4.
Press the drive release button to unlock the drive.
5.
Pull on the latch to remove the drive from the server.
Caution -
damage the latch.
6.
Install the replacement drive or a filler tray.
92
SPARC T8-4 Server Service Manual • January 2022
The latch is not an ejector. Do not force the latch too far to the right. Doing so can
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T8-4 and is the answer not in the manual?
Questions and answers