Remove The Rear Chassis Subassembly - Oracle SPARC T8-4 Service Manual

Remove the Rear Chassis Subassembly

No.
1
2
3
Related Information
"Remove the Rear Chassis Subassembly" on page 184
■
"Install the Rear Chassis Subassembly" on page 187
■
Remove the Rear Chassis Subassembly
1. Verify that the rear chassis subassembly needs to be replaced.
Use the server software to determine if the rear chassis subassembly needs to be replaced. See
"Detecting and Managing Faults" on page 25
Power off the server.
2.
See "Removing Power From the Server" on page
3. Disconnect the power cords.
See "Disconnect Power Cords" on page
4. Go to the rear of the server and remove the following components:
184 SPARC T8-4 Server Service Manual • January 2022
Description
Server chassis
Midplane subassembly
Rear chassis subassembly chassis
for more information.
53.
50.