Servicing The Scc Prom; Remove The Scc Prom - Oracle SPARC T8-4 Service Manual

Servicing the SCC PROM

These topics describe service procedures for the SCC PROM in the server.
The SCC PROM stores the host ID and MAC address. If you have to replace the motherboard,
be sure to move the System configuration PROM from the old motherboard to the new
motherboard. This step will ensure that the server will retain its original host ID and MAC
address.
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause failure of server components.
Steps Description
1. Remove the main module.
2. Replace the SCC PROM.
3. Install the main module.
4. Verify the SCC PROM.

Remove the SCC PROM

The SCC PROM is a cold-service component that can be replaced only by authorized
service personnel. To identify and locate the SCC PROM, see
Components" on page
Before beginning this procedure, ensure that you are familiar with the cautions and safety
instructions described in
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause failure of server components.
1. Remove the main module from the server.
18.
"Safety Information" on page
Links
"Remove the Main Module" on page 99
"Remove the SCC PROM" on page 125
"Install the SCC PROM" on page 126
"Install the Main Module" on page 102
"Verify the SCC PROM" on page 128
"Processor Module
43.
Servicing the SCC PROM 125