Install The Rear I/O Module - Oracle SPARC T8-4 Service Manual

Install the Rear I/O Module

7. Pull the module away from the server to remove it.
8. Remove the eUSB devices on both old and new rear I/O modules, swap, and re-
install eUSB devices on both boards.
Related Information
"Preparing for Service" on page 43
■
"Rear I/O Module LEDs" on page 173
■
"Determine if the Rear I/O Module Is Faulty" on page 176
■
"Install the Rear I/O Module" on page 178
■
"Verify the Rear I/O Module" on page 181
■
Install the Rear I/O Module
Take the necessary ESD precautions.
1.
178 SPARC T8-4 Server Service Manual • January 2022