Table of Contents
Advertisement
[Monochrome Live View]
You can display the recording screen in black and white. This function is useful when a
black and white screen will make it easier to adjust focus in Manual Focus mode.
●
When using the HDMI output during recording, the image is not displayed in black and white.
●
This does not affect recorded pictures.
[Constant Preview]
You can check the effects of the chosen aperture and shutter speed on the recording
screen in Manual Exposure Mode.
●
This function is disabled when the flash is used.
[Peaking]
When you perform Manual Focus operation, this function automatically adds colour to the
portions of the image that are in Focus (portions on the screen with clear outlines).
●
When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you
to achieve a more precise focus.
●
Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
[Detect Level]
[Display Color]
●
Each time [
[LOW]) → [
●
This function is not available in the following case:
• [Rough Monochrome] (Creative Control Mode)
187
[HIGH]
[
] (Light blue)
[
] (Yellow)
[
] (Yellow Green)
[
] (Pink)
[
] (White)
] in [
] is touched, the setting is switched in order of [
] ([Detect Level]: [HIGH]) → [OFF].
→
[Custom] →
[LOW]
[
] (Blue)
[
] (Orange)
[
] (Green)
[
] (Red)
[
] (Grey)
Using Menu Functions
Menu list
[Monitor / Display]
] ([Detect Level]:
Advertisement
Table of Contents
