Table of Contents
Advertisement
5. 4K Photo and Drive Settings
Selecting pictures from 4K burst file and saving
This section describes how to select pictures from a 4K burst file and save them.
For information on how to record 4K burst files, refer to P122.
1
Select an image with the [
• You can also perform the same operation by touching the icon [
• If the image was recorded with [
2
Drag the slide bar to make a rough selection of
scenes.
• For information on how to use the slide view screen, refer to
P127.
• If the image was recorded with [
([4K Burst(S/S)]), you can select its scenes on the 4K burst
playback screen by touching [
3
Drag the frames to select the frame you want to save
as a picture.
• You can also perform the same operation by pressing 2/
1.
4
Touch [
You can save pictures taken during a 5 second period at once by using [4K PHOTO
Bulk Saving] in the [Playback] menu.
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
] icon on the playback screen, and press 3.
] (Fn3).
] to save the picture.
] ([4K Pre-Burst]), proceed to step
] ([4K Burst]) or [
]
(P128)
(P231)
126
].
3
.
Slide view screen
Fn3
Fn1
Advertisement
Table of Contents
