Com Port Baud Rate; Com Port Testing - Teledyne 200E Instruction Manual

Operating Instructions

6.9.7. COM Port Baud Rate

To select the baud rate of one of the COM Ports, press:
Select which COM
port to configure.
Press SET> until you
reach COM1 BAUD
RATE
Use PREV and NEXT
keys to move
between available
baud rates.
300
1200
4800
9600
19200
38400
57600
115200

6.9.8. COM Port Testing

The serial ports can be tested for correct connection and output in the COMM menu. This
test sends a string of 256 'w' characters to the selected COM port. While the test is running,
the red LED on the rear panel of the analyzer should flicker.
80
SAMPLE RANGE = 500.0 PPB
< TST TST > CAL
PRIMARY SETUP MENU
SETUP X.X
CFG DAS RNGE PASS CLK
SECONDARY SETUP MENU
SETUP X.X
COMM VARS DIAG
SETUP X.X COMMUNICATIONS MENU
ID COM1 COM2
SETUP X.X COM1 MODE:0
SET> EDIT
EXAMPLE
SETUP X.X COM1 BAUD RATE:19200
<SET SET> EDIT
SETUP X.X COM1 BAUD RATE:19200
PREV NEXT
SETUP X.X COM1 BAUD RATE:9600
NEXT ON
Model 200E Instruction Manual
NOX=X.X
SETUP
MORE EXIT
EXIT
EXIT
EXIT
EXIT
ENTR EXIT
ENTR EXIT
EXIT returns
to the
previous
menu
EXIT key
ignores
the new
setting
ENTR key
accepts
the new
setting
044100102 Rev A