M200E Documentation
SAFETY MESSAGES
Your safety and the safety of others is very important. We have provided many important
safety messages in this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety
message is associated with a safety alert symbol. These symbols are found in the manual
and inside the instrument. The definition of these symbols is described below:
The analyzer should only be used for the purpose and in the manner described in
this manual. If you use the analyzer in a manner other than that for which it was
intended, unpredictable behavior could ensue with possible hazardous
This analyzer is for indoor use only and for altitudes up to 2000 m (6500 ft).
ii
GENERAL SAFETY HAZARD: Refer to the instructions for
details on the specific hazard.
CAUTION: Hot Surface Warning.
CAUTION: Electrical Shock Hazard.
TECHNICIAN SYMBOL: All operations marked with this symbol
are to be performed by qualified maintenance personnel only.
consequences.
Model 200E Instruction Manual
CAUTION
044100102 Rev A