Appendix B: Spare Parts And Expendables - Teledyne 200E Instruction Manual

Model 200E Instruction Manual

APPENDIX B: Spare Parts and Expendables

Use of replacement parts other than those supplied by Teledyne-API
may result in non-compliance with European standard EN 61010-1.
The following listings contain spare parts for individual ordering as well as recommended
stocking levels for operation of multiple analyzers to minimize downtime for any one
analyzer unit.
The expendables (chemicals, filters, O-rings etc) are not included in the spare parts listing,
neither are optional analyzer components as listed in Chapter 5.
Part Number
000940100 CD, ORIFICE, 0.003" GREEN
000940400 CD, ORIFICE, 0.004" BLUE
000940500 CD, ORIFICE, 0.007" ORANGE
000940600 CD, ORIFICE, 0.010" BROWN
002270000 GASKET, WINDOW
002730000 CD, FILTER, 665NM
003290000 THERMISTOR, BASIC
009070000 COOLER, T.E
010150101 ASSY, MOLY CONVERTER WELDED
CARTRIDGE
011930000 CD, PMT, NOX, M200AR928
013140000 ASSY, COOLER FAN, M200A
014080100 ASSY, HVPS, SOX/NOX
016290000 WINDOW, SAMPLE FILTER, 47MM
024710000 ASSY, TUBING, TU0000001, 6FT
024720000 ASSY, TUBING, TU0000002, 6FT
024750000 ASSY, TUBING, TU0000009, 6FT
037860000 ORING, TEFLON, RETAINING RING,
47MM
040010000 ASSY, FAN REAR PANEL, E SERIES
040300100 ASSY, 115V CONFIG PLUG, M200E
040300200 ASSY, 230V CONFIG PLUG, M200E
044100120 Rev A
Table B-1: M200E Individual Spare Parts List
Description
NOTE
Notes
Flow Control Orifice, 40 cm³/min, high
concentration sample flow
Flow Control Orifice, 80 cm³/min, standard
ozone flow
Flow Control Orifice, 250 cm³/min, optional
sample and/or ozone flow
Flow Control Orifice, 500 cm³/min, standard
sample flow
Gasket for reaction cell window
Reaction cell optical glass filter
Thermistor for reaction cell. Also used in IZS
option, bypass manifold and O
Thermo-electric PMT cooler
NO converter cartridge, guts only without
2
heater and thermocouple
Photo multiplier tube (PMT)
92 mm PMT cooling fan under PMT housing
PMT socket and high voltage power supply
including LED and thermistor housing.
Replacement glass window for sample filter
Clear FEP tubing, 1/8" OD, ~1.8 m
Black FEP tubing, 1/8" OD, ~1.8 m
Clear PVC tubing, 1/4" OD, ~1.8 m
Sample filter retaining ring
60 mm main chassis fan on rear panel
Power configuration plug for 115 V AC
Power configuration plug for 230 V AC
APPENDIX B
sensor.
2
251