Holdoff Feature - Teledyne 200E Instruction Manual

Operating Instructions
To disable a data channel, press SETUP-DAS-ENTR and the following keys:
Toggle key to turn
channel ON or OFF

6.10.2.12. HOLDOFF Feature

The iDAS HOLDOFF feature allows to prevent data collection during calibrations and during
the DAS_HOLDOFF period enabled and specified in the VARS (Section 6.5). To enable or
disable the HOLDOFF for any one iDAS channel, press SETUP-DAS-ENTR and then:
Toggle key to turn
HOLDOFF ON or OFF
100
FROM THE DAS PASSWORD MENU
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER,
PREV NEXT INS DEL EDIT
SETUP X.X
NAME:CONC
<SET EDIT PRINT
SET>
Press SET> key until...
SETUP X.X
CHANNEL ENABLE:ON
<SET SET> EDIT PRINT
SETUP X.X
CHANNEL ENABLE:ON
OFF
FROM THE DAS PASSWORD MENU
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER,
PREV NEXT INS DEL EDIT
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT
Press SET> key until...
SETUP X.X CAL HOLD OFF:ON
SET> EDIT PRINT
SETUP X.X CAL HOLD OFF:ON
ON
Model 200E Instruction Manual
2, 900
Exits to the main
Data Acquisition
PRNT EXIT
EXIT
EXIT
ENTR accepts the new
setting and returns to the
EXIT ignores the new setting
and returns to the previous
ENTR EXIT
2, 900
Exits to the main
Data Acquisition
PRNT EXIT
menu
EXIT
EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
ENTR EXIT
menu
previous menu.
menu.
menu.
044100102 Rev A