Ce Mark Compliance; Warranty - Teledyne 200E Instruction Manual

Model 200E Instruction Manual Specifications, Approvals and Warranty

2.3. CE Mark Compliance

The Teledyne-Advanced Pollution Instrumentation Nitrogen Oxides Analyzers M200E,
M200EH and M200EM were tested and found to be fully compliant with:
EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B Section 15.107 Class A,
ICES-003 Class A (ANSI C63.4 1992) & AS/NZS 3548 (w/A1 & A2; 97) Class A.
Tested on January 02-06, 2003 at CKC Laboratories, Inc., Report Number CE03-005.
The Teledyne-Advanced Pollution Instrumentation Nitrogen Oxides Analyzers M200E,
M200EH and M200EM were tested and found to be fully compliant with:
EN61010-1 (2001)
Tested on January 27-20, 2003.

2.4. Warranty

Warranty Policy (02024C)
Prior to shipment, T-API equipment is thoroughly inspected and tested. Should equipment
failure occur, T-API assures its customers that prompt service and support will be available.
Coverage
After the warranty period and throughout the equipment lifetime, T-API stands ready to
provide on-site or in-plant service at reasonable rates similar to those of other manufactur-
ers in the industry. All maintenance and the first level of field troubleshooting is to be
performed by the customer.
Non-API Manufactured Equipment
Equipment provided but not manufactured by T-API is warranted and will be repaired to the
extent and according to the current terms and conditions of the respective equipment
manufacturers warranty.
General
T-API warrants each product manufactured by T-API to be free from defects in material and
workmanship under normal use and service for a period of one year from the date of
delivery. All replacement parts and repairs are warranted for 90 days after the purchase.
If a product fails to conform to its specifications within the warranty period, T-API shall
correct such defect by, in T-API's discretion, repairing or replacing such defective product or
refunding the purchase price of such product.
The warranties set forth in this section shall be of no force or effect with respect to any
product: (i) that has been altered or subjected to misuse, negligence or accident, or (ii)
that has been used in any manner other than in accordance with the instruction provided by
T-API or (iii) not properly maintained.
044100102 Rev A 7