Malfunctions And Troubleshooting; Error Codes - Leica CV5030 Instructions For Use Manual

Robotic cover slipper
Hide thumbs Also See for CV5030:
Table of Contents

Advertisement

8.

Malfunctions and Troubleshooting

8.1

Error codes

Note
All of the error messages with the corresponding actions for troubleshooting are listed below. If faults
occur that cannot be corrected with the procedures recommended in the table, or if they occur again,
contact the responsible Leica Service contact person. In case of errors, generally the user's first step
is to secure the specimens located at different positions in the instrument/workstation while ensuring
personal safety.
Display
Error 301
SLIDER BLOCKED
Error 305
GR-X BLOCKED
Error 306
GR-Z BLOCKED
Leica CV5030
Cause
The specimen slide outfeed
is blocked.
The horizontal movement of
the gripper tongs is blocked.
The gripper is blocked in its
vertical movement.
Malfunctions and Troubleshooting
Troubleshooting
Check the specimen slide outfeed
(→ p. 86 – 7.5.11 Specimen slide outfeed)
and output magazine
Specimen slide holder, gripper and output
magazines). Remove the cause of the
blockage (glued-on material due to coverslip
mountant residue) if necessary
7.6.3 Specimen slide holder, gripper and
output
magazines). Switch the instrument
off and back on and proceed as described in
(→ p. 42 – 5.3 Switching the instrument on
or
off).
Remove the cause of the blockage. If the
gripper tongs have gripped a specimen slide,
use RELEASE SLIDE to open the gripper tongs
and manually remove the specimen slide. Then
switch the instrument off and on and proceed
as described in
(→ p. 42 – 5.3 Switching the
instrument on or
off). Ensure that any adhesive
residue has been cleaned from the gripper
jaws (adhesive from leftover labels sensitive to
solvents)
(→ p. 87 – 7.6.3 Specimen slide
holder, gripper and output
Remove the cause of the blockage. If the
gripper tongs have gripped a specimen slide,
use RELEASE SLIDE to open the gripper tongs
and manually remove the specimen slide. Then
switch the instrument off and on and proceed
as described in
(→ p. 42 – 5.3 Switching the
instrument on or
off).
8
(→ p. 87 – 7.6.3
(→ p. 87 –
magazines).
91

Advertisement

Table of Contents
loading

Table of Contents