Leveling The Instrument - Leica CV5030 Instructions For Use Manual

4
Instrument Setup
1
2
Fig. 7
5. To transport the instrument, reinstall the transport anchors in the opposite order.
Note
We recommend keeping the transport anchors and screws close to the instrument in the provided clear
plastic bag.
4.4

Leveling the instrument

1. Move the instrument to its final location on the work surface. When doing so, ensure that all four
feet are on the work surface.
2. Open the hood and place a suitable spirit level
(→ Fig. 8).
3. The instrument can be leveled in both directions by screwing or unscrewing the instrument feet
(→ Fig. 8-2).
1
Fig. 8
24
3
2
4
(→ Fig. 8-1) onto the work surface as shown in
2
1
Version 3.4, Revision M