Setting Parameter Sets; Menu A - Parameter Settings - Leica CV5030 Instructions For Use Manual

Fig. 38
5.9

Setting parameter sets

L There are a total of four programs
different parameter settings.
• Pressing the START button calls up the next higher program.
• Pressing the PAUSE button calls up the next lower program (→ Fig. 39).
Fig. 39
5.10 MENU A — parameter settings
L The individual buttons used to select and program the respective parameters are in the bottom
row of the control panel field.
Leica CV5030
MENU B includes the following parameters:
1
CSP - Cover slip placement position
STP - Starting point for the coverslip mountant
stroke
SPK - Volume of the signal tone
LIM - Cover slip limit setting
(SET 1 to SET 4) that can be stored in the instrument with
5
Operation
59