Operation; Control Panel Functions - Leica CV5030 Instructions For Use Manual

5

Operation

5. Operation
5.1

Control panel functions

Note
(→ Fig. 31) is provided as an example only and shows a valid start display for this instrument.
The control panel field consists of a membrane keyboard with ten pushbuttons, four LED indicators and a
two-line LCD display.
• It is used to control the functions of the instrument and to display the software status.
• The control panel field indicates the current status of the robotic coverslipper and operations in
progress.
• Different parameters (settings) can be programmed for the coverslipping operation using the
pushbuttons.
• The display shows informational and error messages.
• A pushbutton can fulfill different functions. The differences are listed in (→ p. 41 – 5.2 Key
functions for instrument operation)
Note
The functions, indicators, settings, etc. outlined in this chapter apply to firmware version 3.01.04 or
later.
40
Fig. 31
and (→ p. 58 – 5.8 Button functions for programming).
Version 3.4, Revision M